|
|
|
GENERAL INFORMATION
CorGal
tanks are used for water or
liquid storage.
CorGal
tanks are constructed of
Scafco corrugated, galvanized, punched and rolled steel wall sheets that are bolted
together at a project site. Most
CorGal
tanks are round structures
but special shapes can also be produced.
CorGal
tanks are very adaptable
and range from 6' to 105' diameter.
CorGal
tanks generally are fitted
with preliners and flexible membrane liners on the inside of the tanks for
water containment. The
CorGal
tank does not have a bottom
structure. Most
CorGal
tanks are constructed on a
concrete foundation. The use of a flexible membrane liner also distributes
the water load uniformly across the foundation area.
For those applications for which a
liner is not suitable, then a
CorGal
tank can be constructed
with double punched and gasketed wall sheets that are bolted together. A
concrete floor is then poured inside the tank to complete the water seal.
The assembly of the
CorGal
tank can be accomplished
with few tools and semi-skilled labor. An assembly manual is provided with each
tank order for field assembly use.
CorGal
tanks are used for
permanent or temporary storage because the tanks can be disassembled and
relocated if necessary.
TYPICAL APPLICATIONS FOR
CorGal
TANKS
|
Potable water storage |
Rainwater cisterns
|
|
Fish brooding tanks |
Fire protection
|
|
Wastewater processing clarifiers |
Contact tanks |
|
Stormwater detention and treatment |
Sand filters |
|
Enclosures and
Bulk storage |
Mining |
|
Thermal storage and water cooling |
Agriculture |
|
Septic and gray water tanks |
Irrigation
|
|
Industrial liquid storage and processing |
Aquaculture |
|
With our large
and growing dealer network of designers, dealers and installers you can be
assured there will always be a
CorGal
representative ready to assist you in your water storage project before, during
and after the tank project begins.
|
|
|
